The Lightning Project… part four

Posted: September 22, 2016 in Just Me
Tags: , , , , , , ,

The next step is to remove the head, so we can check the condition of the combustion chamber, the valves, the bores, and of course the pistons. Somewhere in here is the reason for the low compression in the right hand cylinder, it is just a case of checking out the parts as you see them.

The valves seem fine, and have no leaking, so that really only leaves the piston or rings.

lightning001_016-copy

Valves

Now we get the heart of the matter, the first look at the bores, and piston crowns, there was a fair bit of carbon build up, which I have started to clean off the pistons. There is slight scoring in the bores showing signs of previous trouble, a minor nip up, or a ring broken in the past.

lightning001_014-copy

A65L barrels and pistons

The barrel just needs a light hone, and will be good to go, the piston crowns show +20 so there was a past problem hence the signs of previous scoring, and with the barrel removed we find the cause of low compression, the rings are all stuck solid in the right piston, nothing too major then.

lightning001_012-copy

+20

lightning001_017-copy

Stuck rings = low compression

Right time to strip and clean all the parts, hone the barrels, new piston kits, valves, valve guides etc, and start building it back up.

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s