Posts Tagged ‘Dynatek’

I may have found the problem, but I won’t know until next weekend…
I hit my little lockup this morning armed with enthusiasm and coffee, and set to, trying to uncover what is going wrong, now in my mind I feel it is fuel related, but I still started by checking and changing all the electrical bits again, so plugs, points, condenser all changed again, next I looked at the carbs, pulled them apart, made sure all was clean, and put them back together again. and as it happens, the carb filters were clean, then I removed the tank, and fuel lines, fuel lines were also clean. then I drained the tank and stripped the fuel taps, now these taps don’t have any filter attached, and there inside the left hand tap was a flake of paint that could be acting like a butterfly valve. Was it just fuel starvation at higher revs, we shall find out next weekend.
I am now ordering new taps with built in filters, although I did flush the tank, and not much crap came out, so maybe I was just unlucky. I hope this is all it was.

Of course life is not that simple in my world, in checking the carbs over, I removed the choke cable assembly, and managed to brake my choke lever body, so now I am looking for one of those items too?

20170501_121122

Moto Guzzi choke lever assembly

20170501_121116

Now broken, anybody got a spare?

Even though my Eldo has been acting like a spoiled brat of late, I thought I would treat it to some new parts, I ordered the Dyna DBR-1 power booster a couple of weeks back, and it arrived over the weekend, so I picked that up today. This should be a good upgrade for a rally bike, because you are leaving all the points related parts in place, even all the original wiring is still there in case you need to swap back.  I also popped into DellOrto for some rebuild kits for the VHB carb’s, and some other goodies as well…

Guzzi_002 copy

New parts to be fitted.